Overview

BA Analog Current Sensor/current transducer apply the principle of electromagnetic induction to measure the AC current in the power grid in real time, and use constant current and linear compensation technology to isolate and transform it into a standard DC signal output. Most use in industrial automation for PLC.

Parameter

		BA05-AI/I(V)	BA10-AI/I(V)	BA20-AI/I(V)	BA50-AI/I(V)	BA50L-AI/I(V)
Auxiliary power	DC 12V	DC 12V DC 24V	DC 12V DC 24V	DC 12V DC 24V	DC 12V DC 24V	DC 12V DC 24V
	DC 24V
Consumption		≤1W	≤1W	≤1W	≤1W	≤1W
Through-hole size		φ5mm	φ10mm	φ20mm	φ50mm	φ50mm
Input	Current	AC 0~(0.5~10)A	AC 0~(8~50)A	AC 0~(40~200)A	AC 0~(60~600)A	AC 0~(0.1~1)A (limitation of leakage currents)
Output	Nominal value	DC4-20mA,or 0-20mA,0-5V,0-10V etc
	Load resistance	Current output≤500Ω，Voltage output≥1kΩ
Accuracy Class		0.5%
Response time		≤350ms
Temperature		Operation:-10 to +55℃ Storage:-25 to +70℃
Temperature coefficient		≤200ppm/℃
Installation		(Rail)DIN35,fix on cubicle with screws
Standards		GB/T 13850

BA50-AI/I

●Input: 0-1A Leakage Current

●Output: DC 4-20mA

●Measurement of Leakage Current

●Overload: 1.2 times of Rated Value

BA20-AI/V

●Application: Industrial automation

●Input: AC current measurement up to 200A

●Overload: 1.2 times of the rated value

●Output: DC 0-5V

Appearance

24K3X2V3)EFL(F_BIV`63PL

●Higher accuracy ●Higher Level of Isolation ●Higher Safety Level ●Lower Consumption

Dimensions

Installation

Choose a suitable place to install the standard DIN35mm rail, and install the BA sensor on the rail;

On the bottom panel of the cabinet, choose a suitable place to open two threaded holes corresponding to the position of the fixed hole of the installed sensor; After placing the sensor, install the positioning screw