Overview

Our Intelligent Current Transducers are sensors specially used to convert the raw voltage and current in the power system into useful electrical signals, and then forward these electrical signals to the controller or PLC, process and record them, these electrical signals can be used in the measurement system use and transmission. They are small in size and easy to install and remove, which can help you effectively save assembly time and space. And they come with higher monitoring accuracy than conventional sensors, and can measure current efficiently even in less wiring or low-voltage environments.

Features

Our Intelligent Current Transducers keep track of the condition of electrical wiring and equipment, preventing fires and other accidents caused by leaks and effectively safeguarding the safety of users and their equipment. They provide you with clear and easy-to-use signals, offering efficient performance for servo drives or other high-precision applications. The pure copper coils inside provide high conversion power while have long service time. In addition they are supplied with a dotted rubber encapsulated potentiometer for increased vibration resistance and effective protection against current disturbances.

Parameter

Technical parameter			Index
Accuracy class			Class 0.5
Input	Nominal value	BA20(Ⅱ)-AI	Current AC 0.5A, 50A, 200A, etc. AC 0～(0.5～200)A
		BA50(Ⅱ)-AI	Current AC 60A, 300A, 600A, etc. AC 0～(60～600)A
		BA50L(Ⅱ)-AI	Current AC 0.1A, 1A, etc. AC 0～(0.1～1)A
	Overload	Continuous 1.2 times, instantaneous current 10 times/1S
	Absorbed power	≤1VA
	Frequency response	25Hz～800Hz, especially suitable for industrial frequency
Output	Nominal value	DC4～20mA, or 0～20mA, 0～5V, 0～10V① etc.
	Load Resistance	When DC12V power supply, current output Class 0.5is ≤250Ω When DC24V power supply, current output is ≤500Ω, When voltage output is ≥1KΩ
	Communication	RS485 interface/Modbus-RTU②
Response time		≤400ms
Power supply	Voltage	12V or 24V
	Power consumption	≤1W
Insulation resistance		＞100MΩ
Compressive strength		Between input/output and power supply 2.0KV/1min,50Hz
Temperature Coefficient		-10℃～+55℃, ≤400ppm/℃
Environment	Temperature	Work: -10℃～+55℃ Storage: -25℃～+70℃
	Humidity	≤93%RH, no condensation, no corrosive gas place
	Altitude	≤2000m
Installation method		TS35 rail, or use screws to fix the cabinet

Note: ①0～10V output is only suitable for DC24V power supply;

②The communication function is optional.

BA10-AI/I

●Application: Industrial automation

●Input: AC current measurement up to 50A

●Overload: 1.2 times of the rated value

●Output: DC 4-20mA

BA20-AI/V

●Application: Industrial automation

●Input: AC current measurement up to 200A

●Overload: 1.2 times of the rated value

●Output: DC 0-5V

Appearance

Dimensions

Integrated Installation

Integrated installation, a rotating structure can be used in the perforated part.

There are Φ20, Φ50 of hole sizes for your selection.

The main body could be connected to the display screen in order to display current and set parameters when integrated installation (use existing display screen as far as possible)