Description

ADL100 single-phase electric meter is designed for single-phase active energy measurement on low voltage systems, at the same time it can measure the electrical parameters like voltage, current, power, and so on. There is also RS485 can be chosen. This power meter has the advantages of smaller volume, high precision, good EMC, easy installation, etc, All meters meet the related technical requirements of electronic power meters in the IEC62053-21,IEC62053-22 standards.

Appearance

1.1

Parameter

Input voltage	Reference voltage	AC 220V
	Reference frequency	50Hz
	Power consumption	<10VA
Input current	Basic current	10A
	Maximum current	60A
	Starting current	4‰Ib
	Consumption	<4VA (Maximum current)
Measurement performance	Accuracy of measuring	1class
Measurement performance	Range of measuring	000000.00~99999999kWh
Clock accuracy		Error≤0.5s/d
Active pulse	Pulse width	80±20ms
Active pulse	Pulse constant	1600imp/kWh,LED
Communication	Interface	RS485(A+,B-)
	Connection mode	Shielded twisted pair conductors
	Protocol	MODBUS-RTU

Function

intro

Function	Function description	Function provide
Measurement of kWh	Single-phase active kWh (positive and negative)	■
Measurement of electrical parameters	Voltage, Current, Active power, Reactive power, Apparent power, Power factor and Frequency	■
LCD Display	8 bits section LCD	■
Key programming	3 keys to set parameters like code, address, baud rate, multi-tariff, and communication protocol	■
Pulse output	Active energy pulse output	■
Multi-tariff	Adapt 4 time zones, 2 time interval lists, 14 time intervals by day, and 4 tariff rates	□F
Communication	Communication interface: RS485, Communication protocol: MODBUS-RTU	□C
Communication	Infrared communication	■

function-min

function2-min

Dimensions

1.2_

Instrument dimensions

Note：The torque should not be greater than 4.0N·m

1.3

External transformer dimensions

Wiring

1.4_

1.5

10(60)A

ADL100 single phase electric meter used the direct connecting method. Please pay attention to the direction of input and output while wiring and screw tightly, prevent the meter from the abnormal work.